Insulation Board Clip

by Insulation Board Clip in NP7 5UW

To raise the money for tooling and have product to sell to customers who can order here.

by Insulation Board Clip in NP7 5UW

£0

raised of £50,000 target

0

supporters
0% 37 days left
This project will only be funded if at least £50,000 is pledged by November 2nd 2018 at 3:45pm

Introducing a fire retardant insulation board clip that doubles as a noggin without restricting the air void.

The new insulation retaining clip is the revolutionary way to insulate and erect ceilings in one operation. It was developed out of necessity and patented by a contractor with over 40 years trade experience. It has been endorsed by quantity surveyors, architects and tradesmen. Our problem was that 50-150mm urethane based insulation has to be friction fitted. But friction fit only works until air dries the timber member and releases the board allowing the 25mm air-gap to irritate the slab and cause drywall screw heads to pop. The main objective of our noggin or clip is to ensure that the 25mm air-gap is not blocked.

                                                              

Accessory - Plasterboard to joist end detail shortfall oversail component

100mm wide and 1100mm long pvc-u self-adhesive strip

This accessory strip allows plasterboard to be joined between spans dispensing with the need to join on a 30mm timber as previously.

When you apply plasterboard to the other side of the 100mm buildup with trusses being so narrow there is a good chance that screws
 miss the joist and so this 100mm strip enables you to fix the plasterboard to a shortfall over sail situation without cutting boards. This strip can only be used as part of our grid buildup.


Your pledge will contribute to the tooling costs and secure the first order off the production line, which should be with us in the Spring. 

Risks and challenges

The only challenge is raising awareness of our product with limited budget. All costs have been calculated based on the best quote we have received so that we get our tooling and everyone gets their order.  

What then

We will have our tooling paid for, some samples to send to retailers and this will make future production runs more affordable.

Just donate

Rewards

This project offers rewards in return for your donation.

£250 or more

0 of 200 claimed

Box of 50

Box of 50 PVCu 100mm insulation retaining clips.

£20 or more

Pack of 10 Self-Adhesive Strips

Plasterboard to joist end detail shortfall oversail component 100mm wide and 1100mm long pvc-u self-adhesive strip This accessory strip allows plasterboard to be joined between spans dispensing with the need to join on a 30mm timber as previously.


Lets make 'Insulation Board Clip' happen